Fra Wikipedia, den frie encyklopædi
Spring til navigation Spring til søgning
Documentation icon Moduldokumentation[vis] [redigér] [historik] [opfrisk]
Ambox warning orange.svg
Dette Lua-modul bruges på 4 sider, og derfor vil ændringer blive bemærket af mange. Vær venlig at afprøve enhver ændring i skabelonens /sandkasse eller /test-undersider, eller i en brugerunderside. Du bør også overveje at diskutere ændringer på diskussionssiden før du tilføjer dem.

This module is used to detect the page type of a given page. It detects redirect pages automatically and is highly customisable. It can be used on its own or as a meta-module to create other page-type-detection templates. This module can also be accessed using {{pagetype}}.

Syntax[redigér wikikode]

Basic usage
All parameters
| page              = 
| defaultns         = 
| main              = 
| user              = 
| wikipedia         = 
| project           = 
| wp                = 
| file              = 
| image             = 
| mediawiki         = 
| template          = 
| help              = 
| category          = 
| portal            = 
| book              = 
| draft             = 
| education program = 
| timedtext         = 
| module            = 
| topic             = 
| special           = 
| media             = 
| talk              = 
| redirect          = 
| dab               = 
| na                = 
| other             = 

Basic usage[redigér wikikode]

For simple detection of the page type of the current page, use the default settings:


That will produce the following results, depending on the page type or the namespace:

Page type / namespace Output
Redirects (in any namespace) redirect
Main namespace article
File namespace file
Template namespace template
Category namespace category
Module namespace module
Book namespace book
Other namespaces page

If the module is used on a talk page, it will detect the page type for the corresponding subject page.

Code Result
{{#invoke:pagetype|main}} modul

Page parameter[redigér wikikode]

You can use the page parameter to make the module act as though it was called from that page.

{{#invoke:pagetype|main|page=page name}}
Code Result
{{#invoke:pagetype|main|page=United Kingdom}} redirect
{{#invoke:pagetype|main|page=UK}} redirect
{{#invoke:pagetype|main|page=Talk:United Kingdom}} redirect
{{#invoke:pagetype|main|page=File:Example.svg}} fil
{{#invoke:pagetype|main|page=Wikipedia:Namespace}} page
{{#invoke:pagetype|main|}} artikel

Adding and removing namespaces[redigér wikikode]

It is possible to specify different behaviour for each namespace than that described in the basic usage section. For example, you might want the module to display "user page" for pages in the user namespace, instead of the default "page". To do this, you can use the code |user=yes. This looks up the typical name used for pages in the user namespace, in this case "user page", and uses that text when the module is used with a page in the user namespace. To use this with other namespaces, use the namespace name in lower case as a parameter:

| user              = yes
| wikipedia         = yes
| project           = yes
| wp                = yes
| mediawiki         = yes
| help              = yes
| portal            = yes
| draft             = yes
| education program = yes
| timedtext         = yes
| topic             = yes
| special           = yes
| media             = yes

You can use any of the following to specify the namespace: "yes", "y", "true" or "1". They can be used in any combination of upper and lower case. (These values are defined by Module:Yesno.)

The default text for these namespaces is as follows:

Page type / namespace Output
User namespace user page
Wikipedia namespace project page
MediaWiki namespace interface page
Help namespace help page
Portal namespace portal
Draft namespace draft
Education program namespace education program page
Timed Text namespace Timed Text page
Topic namespace topic
Special namespace special page
Media namespace file

You can use a similar process to remove any of the default namespace values as well. For example, if you use the code |template=no, then the module will display "page" when used on a template page, rather than the default "template".

| main     = no
| file     = no
| template = no
| category = no
| module   = no
| book     = no

The following values will all work to remove namespace values: "no", "n", "false" or "0". They can be used in any combination of upper and lower case.

Code Result
{{#invoke:pagetype|main|page=Wikipedia:Namespace}} page
{{#invoke:pagetype|main|page=Wikipedia:Namespace|wikipedia=yes}} projektside
{{#invoke:pagetype|main|page=Talk:United Kingdom}} redirect
{{#invoke:pagetype|main|page=Talk:United Kingdom|talk=y}} diskussionsside
{{#invoke:pagetype|main|page=United Kingdom}} redirect
{{#invoke:pagetype|main|page=United Kingdom|main=no}} redirect
{{#invoke:pagetype|main|}} artikel
{{#invoke:pagetype|main||timedtext=Yes}} artikel

Default namespace sets[redigér wikikode]

As well as adding and removing individual namespaces, it is possible to specify different sets of namespaces by using the |defaultns=. There are four different sets available: all, extended, none and the default set. These sets allow you to specify many namespaces at once, without having to use all of the individual namespace parameters. Namespaces are set according to the following table:

Namespace Value of |defaultns= Output
none extended all Other values
Main Nej Ja Ja Ja article
User Nej Ja Ja Nej user page
Wikipedia Nej Ja Ja Nej project page
File Nej Ja Ja Ja file
MediaWiki Nej Ja Ja Nej interface page
Template Nej Ja Ja Ja template
Help Nej Ja Ja Nej help page
Category Nej Ja Ja Ja category
Portal Nej Ja Ja Nej portal
Book Nej Ja Ja Ja book
Draft Nej Ja Ja Nej draft
Education Program Nej Nej Ja Nej education program page
TimedText Nej Nej Ja Nej Timed Text page
Module Nej Ja Ja Ja module
Topic (Flow boards) Nej Nej Ja Nej topic
All talk namespaces Nej Nej Ja Nej talk page
Special Nej Nej Ja Nej special page
Media Nej Nej Ja Nej file
Code Result
{{#invoke:pagetype|main|page=United Kingdom}} redirect
{{#invoke:pagetype|main|page=United Kingdom|defaultns=none}} redirect
{{#invoke:pagetype|main|page=Talk:United Kingdom}} redirect
{{#invoke:pagetype|main|page=Talk:United Kingdom|defaultns=all}} diskussionsside
{{#invoke:pagetype|main|page=File:Example.svg}} fil
{{#invoke:pagetype|main|page=File:Example.svg|defaultns=none}} page
{{#invoke:pagetype|main|page=Wikipedia:Namespace}} page
{{#invoke:pagetype|main|page=Wikipedia:Namespace|defaultns=extended}} projektside
{{#invoke:pagetype|main||defaultns=extended}} artikel
{{#invoke:pagetype|main||defaultns=all}} artikel

Custom namespace values[redigér wikikode]

It is possible to specify a custom value for any namespace:

| main              = custom text
| user              = custom text
| wikipedia         = custom text
| project           = custom text
| wp                = custom text
| file              = custom text
| image             = custom text
| mediawiki         = custom text
| template          = custom text
| help              = custom text
| category          = custom text
| portal            = custom text
| book              = custom text
| draft             = custom text
| education program = custom text
| timedtext         = custom text
| module            = custom text
| topic             = custom text
| special           = custom text
| media             = custom text
Code Result
{{#invoke:pagetype|main|page=Wikipedia:Namespace}} page
{{#invoke:pagetype|main|page=Wikipedia:Namespace|wikipedia=custom text}} custom text
{{#invoke:pagetype|main|page=Talk:United Kingdom}} redirect
{{#invoke:pagetype|main|page=Talk:United Kingdom|talk=custom text}} custom text
{{#invoke:pagetype|main|page=United Kingdom}} redirect
{{#invoke:pagetype|main|page=United Kingdom|main=custom text}} redirect
{{#invoke:pagetype|main|}} artikel
{{#invoke:pagetype|main||timedtext=custom text}} artikel

Talk parameter[redigér wikikode]

Normally, the module will treat talk pages as if they were in the corresponding subject namespace. However, if the talk parameter is set, the module will treat talk pages separately from subject pages. The talk parameter sets values for all talk pages, i.e. pages in the Talk: namespace, pages in the User talk: namespace, pages in the Wikipedia talk: namespace, and so on.

{{#invoke:pagetype|main|talk=custom text}}

The default value for "talk=yes" is "talk page".

Code Result
{{#invoke:pagetype|main|page=Wikipedia talk:Namespace}} page
{{#invoke:pagetype|main|page=Wikipedia talk:Namespace|wikipedia=yes}} projektside
{{#invoke:pagetype|main|page=Wikipedia talk:Namespace|talk=yes}} diskussionsside
{{#invoke:pagetype|main|page=Wikipedia talk:Namespace|wikipedia=yes|talk=yes}} diskussionsside
{{#invoke:pagetype|main|page=Wikipedia talk:Namespace|talk=custom text}} custom text
{{#invoke:pagetype|main|page=Wikipedia talk:Namespace|wikipedia=yes|talk=custom text}} custom text

Main namespace classes[redigér wikikode]

For pages in the main namespace, it is possible to add a class value in the first positional parameter:


If the class value matches one of the values in the table below, it will produce an alternative to the default output of article.

Class Class values Output
Disambiguation page disambiguation, disambig, disamb, dab page
No applicable class na, n/a page

You can input the class value in any combination of upper and lower case.

Custom main namespace classes[redigér wikikode]

It is also possible to specify a custom value for the main namespace classes:

{{#invoke:pagetype|main|class|dab=custom text|na=custom text}}

This works the same way that it does for the custom namespace page types. Possible parameters are:

  • dab: a custom value for disambiguation-class pages. If set to "yes", "y", "true" or "1", this produces "disambiguation page". If set to "no", "n", "false" or "0", no custom value is produced. If set to any other value it produces that text.
  • na: a custom value for NA-class pages. It works in the same way as the dab parameter. The default value for "yes" etc. is "page".
Code Result
{{#invoke:pagetype|main|page=United Kingdom}} redirect
{{#invoke:pagetype|main|page=United Kingdom|dab}} redirect
{{#invoke:pagetype|main|page=United Kingdom|dab|dab=custom text}} redirect
{{#invoke:pagetype|main|page=United Kingdom|na}} redirect
{{#invoke:pagetype|main|page=United Kingdom|na|na=custom text}} redirect

Redirects[redigér wikikode]

By default, the module automatically detects redirects in all namespace. It is not possible to specify redirect behaviour by namespace, but you can turn redirect detection off, or use a custom value for redirect pages.

{{#invoke:pagetype|main|redirect=custom text}}
Code Result
{{#invoke:pagetype|main|page=UK}} redirect
{{#invoke:pagetype|main|page=UK|redirect=no}} artikel
{{#invoke:pagetype|main|page=UK|redirect=custom text}} custom text

Other namespaces[redigér wikikode]

By default, the module produces "page" if used from a namespace that hasn't been specified. This value can be changed with the |other= parameter:

{{#invoke:pagetype|main|other=custom text}}
Code Result
{{#invoke:pagetype|main|page=Wikipedia:Namespace}} page
{{#invoke:pagetype|main|page=Wikipedia:Namespace|other=custom text}} custom text
{{#invoke:pagetype|main|page=Wikipedia:Namespace|other=custom text|wikipedia=wikipedia-space text}} wikipedia-space text

--                                                                            --
--                                PAGETYPE                                    --
--                                                                            --
--      This is a meta-module intended to replace {{pagetype}} and similar    --
--      templates. It automatically detects namespaces, and allows for a      --
--      great deal of customisation. It can easily be ported to other         --
--      wikis by changing the values in the [[Module:Pagetype/config]].       --
--                                                                            --

-- Load config.
local cfg = mw.loadData('Module:Pagetype/config')

-- Load required modules.
local getArgs = require('Module:Arguments').getArgs
local yesno = require('Module:Yesno')
local nsDetectModule = require('Module:Namespace detect')
local nsDetect = nsDetectModule._main
local getParamMappings = nsDetectModule.getParamMappings
local getPageObject = nsDetectModule.getPageObject

local p = {}

local function shallowCopy(t)
	-- Makes a shallow copy of a table.
	local ret = {}
	for k, v in pairs(t) do
		ret[k] = v
	return ret

local function checkPagetypeInput(namespace, val)
	-- Checks to see whether we need the default value for the given namespace,
	-- and if so gets it from the pagetypes table.
	-- The yesno function returns true/false for "yes", "no", etc., and returns
	-- val for other input.
	local ret = yesno(val, val)
	if ret and type(ret) ~= 'string' then
		ret = cfg.pagetypes[namespace]
	return ret

local function getPagetypeFromClass(class, param, aliasTable, default)
	-- Gets the pagetype from a class specified from the first positional
	-- parameter.
	param = yesno(param, param)
	if param ~= false then -- No check if specifically disallowed.
		for _, alias in ipairs(aliasTable) do
			if class == alias then
				if type(param) == 'string' then
					return param
					return default

local function getNsDetectValue(args)
	-- Builds the arguments to pass to [[Module:Namespace detect]] and returns
	-- the result.

	-- Get the default values.
	local ndArgs = {}
	local defaultns = args[cfg.defaultns]
	if defaultns == cfg.defaultnsAll then
		ndArgs = shallowCopy(cfg.pagetypes)
		local defaultnsArray
		if defaultns == cfg.defaultnsExtended then
			defaultnsArray = cfg.extendedNamespaces
		elseif defaultns == cfg.defaultnsNone then
			defaultnsArray = {}
			defaultnsArray = cfg.defaultNamespaces
		for _, namespace in ipairs(defaultnsArray) do
			ndArgs[namespace] = cfg.pagetypes[namespace]

	-- Add custom values passed in from the arguments. These overwrite the
	-- defaults. The possible argument names are fetched from
	-- Module:Namespace detect automatically in case new namespaces are
	-- added. Although we accept namespace aliases as parameters, we only pass
	-- the local namespace name as a parameter to Module:Namespace detect.
	-- This means that the "image" parameter can overwrite defaults for the
	-- File: namespace, which wouldn't work if we passed the parameters through
	-- separately.
	local mappings = getParamMappings()
	for ns, paramAliases in pairs(mappings) do
		-- Copy the aliases table, as # doesn't work with tables returned from
		-- mw.loadData.
		paramAliases = shallowCopy(paramAliases)
		local paramName = paramAliases[1]
		-- Iterate backwards along the array so that any values for the local
		-- namespace names overwrite those for namespace aliases.
		for i = #paramAliases, 1, -1 do
			local paramAlias = paramAliases[i]
			local ndArg = checkPagetypeInput(paramAlias, args[paramAlias])
			if ndArg == false then
				-- If any arguments are false, convert them to nil to protect
				-- against breakage by future changes to
				-- [[Module:Namespace detect]].
				ndArgs[paramName] = nil
			elseif ndArg then
				ndArgs[paramName] = ndArg
	-- Check for disambiguation-class and N/A-class pages in mainspace.
	if ndArgs.main then
		local class = args[1]
		if type(class) == 'string' then
			-- Put in lower case so e.g. "Dab" and "dab" will both match.
			class = mw.ustring.lower(class)
		local dab = getPagetypeFromClass(
		if dab then
			ndArgs.main = dab
			local na = getPagetypeFromClass(
			if na then
				ndArgs.main = na
	-- If there is no talk value specified, use the corresponding subject 
	-- namespace for talk pages.
	if not then
		ndArgs.subjectns = true
	-- Add the fallback value. This can also be customised, but it cannot be
	-- disabled.
	local other = args[cfg.other]
	-- We will ignore true/false/nil results from yesno here, but using it
	-- anyway for consistency.
	other = yesno(other, other)
	if type(other) == 'string' then
		ndArgs.other = other
		ndArgs.other = cfg.otherDefault
	-- Allow custom page values. =
	return nsDetect(ndArgs)

local function detectRedirects(args)
	local redirect = args[cfg.redirect]
	-- The yesno function returns true/false for "yes", "no", etc., and returns
	-- redirect for other input.
	redirect = yesno(redirect, redirect)
	if redirect == false then
		-- Detect redirects unless they have been explicitly disallowed with
		-- "redirect=no" or similar.
	local pageObject = getPageObject(
	-- If we are using subject namespaces elsewhere, do so here as well.
	if pageObject
		and not yesno(, true)
		and args[cfg.defaultns] ~= cfg.defaultnsAll
		pageObject = getPageObject(
			pageObject.subjectNsText .. ':' .. pageObject.text
	-- Allow custom values for redirects.
	if pageObject and pageObject.isRedirect then
		if type(redirect) == 'string' then
			return redirect
			return cfg.redirectDefault

function p._main(args)
	local redirect = detectRedirects(args)
	if redirect then
		return redirect
		return getNsDetectValue(args)

function p.main(frame)
	local args = getArgs(frame)
	return p._main(args)

return p